Published at Sunday, September 09th 2018. by Summer Miranda in Nailer.
When you're buying finish nailers for the first time, the question you need to decide between a pneumatic or cordless type. The pneumatic type of nailer uses an air compressor to power it and conversely, the cordless nailer uses a combination of the compressed air canister air and a rechargeable battery in driving the nail through stock. Obviously, an advantage with a cordless unit is not having a cord attached to it but it may be a bit heavier because of the battery.
This doesn't mean you have to spend a fortune! but if you do pay a little more for a quality coil nailer I can assure you it will save you time and money in the long run.
Apart from working faster compared to the traditional hammers, this type of nailer can easily be used with just one hand - giving you a spare hand to hold the trim in place. Angled or straight type nailers can use nails which range from gauges 15-18 and come in strips of 50 to 100.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
Senco's FinsihPro10 (23 gauge) pin nailer is another example of Senco's line of brilliant pneumatic machines. At only 2.35 lbs the tool is ultra compact and lightweight to ensure strained, awkward, or continuous use is simpler and more comfortable for operators. Ideal for the most intricate finish, trim, and remodeling work, the FinishPro 10 fastens securely while still only making a virtually imperceptible hole in your materials. a hardened steel driver contributes to overall longevity, and with a smooth metal cap to protect your working materials, the pinner, with durabilty and delicate precision, yields results impeccable to the slightest detail. To ensure you are safe from a frustratingly empty magazine, the tool has a low load indicator, and is designed to load easily. The nailer shoots 1/2" - 1" fasteners, and with the help of a rear exhaust system,your work is protected from damaging oil and dust. Altogether, this pin nailer is built with sophistication for smooth, powerful, comfortable use in even hard woods and rough materials, and pricing at just about $130, the nailer is a smart, affordable addition to your tool repertoire.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 etinet.biz. All Rights Reserved.