Published at Friday, 10 August 2018. Nailer. By Alta Roach.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
In saying that the first thing to look for whenever you are in the market to purchase (not just a coil nailer but any tool) should be good quality, this would be the first thing to check off you list! A well known brand is a good place to start.
Once you have properly aligned the nailer, push it gently toward the wood and depress its safety nose before pulling on the trigger. If you do things right, you should get the nail driven directly in the trim at your desired angle.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 etinet.biz. All Rights Reserved.