Published at Friday, 10 August 2018. Nailer. By Alta Roach.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
Wherever high precision is required in driving in the nails, pneumatic nailers are used. They are known so, based on the method they use to drive in the nails. The nails are punched in through the pneumatic or air pressure.
When working in constricted areas like in between wall studs or ceiling joists, one needs a smaller air nailer. The Palm air nailers come pretty handy in such situations as they are small enough to fit easily within the palm of your hand.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 etinet.biz. All Rights Reserved.