Published at Sunday, 02 September 2018. Nailer. By Mari Salas.
The finish nailer is among the most useful tools for those who are doing woodworking. They help nail moldings as well as other small trim boards easily. You can drive thin finish nails through boards of hardwoods and softwoods, as well as manufactured products like MDF, while leaving behind a really small nail hole which you can fill easily with a wood filler. Another benefit of having to use a thin nail is that, you're less likely to split delicate trim boards compared to using larger types of nails or even wood screws.
Wherever high precision is required in driving in the nails, pneumatic nailers are used. They are known so, based on the method they use to drive in the nails. The nails are punched in through the pneumatic or air pressure.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 etinet.biz. All Rights Reserved.