Published at Monday, September 10th 2018. by Angela Hatfield in Nailer.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
When you're using the finish nailer, have the tip positioned on to the trim board where you want to have the nail driven. Then, carefully adjust its position so that you'll drive the nail in the right direction. Usually, when the finish nailer's cylinder and its tip line up perpendicularly to the board's face, it gets your nail driven squarely in the board. In some cases however, you need to adjust the nail's angle so you can capture enough wood behind the molding or trim you're using.
There is a nailer that is used specifically to the roofing projects. The nails used are coil-type, and are specially designed for roofing purposes. This nailer can store a large number of nails at a time.
When working in constricted areas like in between wall studs or ceiling joists, one needs a smaller air nailer. The Palm air nailers come pretty handy in such situations as they are small enough to fit easily within the palm of your hand.
I have spent my life as a carpenter on building sites making a living from the talents of the trade that I posses and the vast array of quality tools in my kit. They say a good tradesman should never blame his tools! Which is true, and I have never met a good tradesman with low quality tools.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 etinet.biz. All Rights Reserved.