Published at Thursday, September 13th 2018. by Kimberley Massey in Nailer.
When you're using the finish nailer, have the tip positioned on to the trim board where you want to have the nail driven. Then, carefully adjust its position so that you'll drive the nail in the right direction. Usually, when the finish nailer's cylinder and its tip line up perpendicularly to the board's face, it gets your nail driven squarely in the board. In some cases however, you need to adjust the nail's angle so you can capture enough wood behind the molding or trim you're using.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
On another hand, Porter-Cable's BN200B is another (18 gauge) brad nailer with all the power and innovation to bring you impressive results with every single shot. With a long-lasting, virtually maintenance-free motor, the tool's durable high-performance is unfailingly reliable, and with a rear exhaust keeping oils and contaminants away from your workpieces, your results are clean and precise. Additionally, a (removable) no-marring nose piece keeps your materials protected against scrapes and scuffs for for the cleanest possible results. The BN200B drives nails from 5/8" to 2" in length (with a depth-of-drive adjustment), and because of an internal piston catch, the tool delivers consistent max power through every shot. A low nail reload mechanism indicates when a reload is required, and with a tool-free jam release, nail removal is always simple. The tool has a 100 nail magazine capacity, and weighing only 2.6 lbs the tool is comfortable during continuous use and even the most awkward applications. Although its strikingly lightweight, the tool is also built with a strong die-cast aluminum body for long-lasting durability, and a special hardened driver blade additionally contributes to the tool's overall longevity. Ultimately, this nailer is pretty awesome, and pricing at only around $100, its a superior tool that will also fit into your budget.
Nailers are not your usual power tools and a general, all-purpose tool does not exist. There are many different types, makes and brands, and every type is meant for a specific purpose. Some are meant for thinner, lighter materials while others are meant for denser, heavier materials. Here are the reviews of some of the more common types of nailers.
Wherever high precision is required in driving in the nails, pneumatic nailers are used. They are known so, based on the method they use to drive in the nails. The nails are punched in through the pneumatic or air pressure.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 etinet.biz. All Rights Reserved.