Published at Sunday, 02 September 2018. Nailer. By Liz Harrell.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
Another specific category of highly specialised nailers are the siding nailers that are built for the purposes of nailing down siding. They are designed to contain a large magazine of specially designed coil type nails.
Framing nail guns - These carry large box-type nails that are about 1"-4" in size. These tools are mainly meant for driving nails in thicker, denser materials. They tend to be stick type and also quite big and heavy.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 etinet.biz. All Rights Reserved.