Published at Sunday, 02 September 2018. Nailer. By Marina Day.
Roofing and siding nailers are of similar size, roofing coil nailer will often have adjustable shingle guides to help keep your work consistent. If you are looking at a gun for dry wall, fibre cement or any project that marks easily you need to be sure the nose of the gun is not sharp and aggressive. On the other hand an aggressive nose is very handy on most other projects making it easy for the tip of the coil nailer to grip to the surface you are nailing when angle nailing.
Siding nailers - Sliding nailers are also highly specialized tools and they are built for the purpose of nailing down siding. They come with a large magazine meant to carry nails made especially for siding. These too tend to be coil type.
When you're using the finish nailer, have the tip positioned on to the trim board where you want to have the nail driven. Then, carefully adjust its position so that you'll drive the nail in the right direction. Usually, when the finish nailer's cylinder and its tip line up perpendicularly to the board's face, it gets your nail driven squarely in the board. In some cases however, you need to adjust the nail's angle so you can capture enough wood behind the molding or trim you're using.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 etinet.biz. All Rights Reserved.