Published at Monday, September 10th 2018. by Angela Hatfield in Nailer.
When working in constricted areas like in between wall studs or ceiling joists, one needs a smaller air nailer. The Palm air nailers come pretty handy in such situations as they are small enough to fit easily within the palm of your hand.
Pneumatic nailers - Pneumatic nailers are a general category division of equipment based on the way the nails are driven. Pneumatic tools drive the nail through pneumatic or air pressure. These can be very effective and are usually used for there high precision.
Apart from working faster compared to the traditional hammers, this type of nailer can easily be used with just one hand - giving you a spare hand to hold the trim in place. Angled or straight type nailers can use nails which range from gauges 15-18 and come in strips of 50 to 100.
When you're using the finish nailer, have the tip positioned on to the trim board where you want to have the nail driven. Then, carefully adjust its position so that you'll drive the nail in the right direction. Usually, when the finish nailer's cylinder and its tip line up perpendicularly to the board's face, it gets your nail driven squarely in the board. In some cases however, you need to adjust the nail's angle so you can capture enough wood behind the molding or trim you're using.
In saying that the first thing to look for whenever you are in the market to purchase (not just a coil nailer but any tool) should be good quality, this would be the first thing to check off you list! A well known brand is a good place to start.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 etinet.biz. All Rights Reserved.