Published at Thursday, September 13th 2018. by Kimberley Massey in Nailer.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
Once you have properly aligned the nailer, push it gently toward the wood and depress its safety nose before pulling on the trigger. If you do things right, you should get the nail driven directly in the trim at your desired angle.
Firstly, Senco is known for building some of the best pneumatic tools this industry has ever seen and their FinsihPro18 (18 gauge) brad nailer is brilliant example of the Senco difference. With the power, durability, and perfectly compact design to bring you the most professional, impressive results, the FinishPro 18 is a tool to be remembered. Weighing only 2.9 lbs the tool's lightweight design entirely eliminates the pains of continuous or overhead work, and this comfort comes without any sacrifice to power; the nailer drives fasteners up to 2" into hard woods making this brad nailer ideal for cabinetry, trim, and any type of finish work. The tool also has an adjustable depth-of-drive for the most precise nailing, and a hardened steel driver for longevity and durability. The tool is simple to load, and with a low-load indicator you'll never be caught off guard with an empty magazine. The tool's no mar pad and rear exhaust (designed to keep debris and oils away from your materials) work together to ensure your workpieces are always clean and unsmudged. Ultimately, this nailer is tough enough for heavy-duty applications while being ultra compact to ensure you are always comfortable and in control of each shot and each application. Additionally, as the Finish Pro 18 only costs around $80 - $90, this brilliant tool comes at a brilliantly affordable price.
When you're buying finish nailers for the first time, the question you need to decide between a pneumatic or cordless type. The pneumatic type of nailer uses an air compressor to power it and conversely, the cordless nailer uses a combination of the compressed air canister air and a rechargeable battery in driving the nail through stock. Obviously, an advantage with a cordless unit is not having a cord attached to it but it may be a bit heavier because of the battery.
In saying that the first thing to look for whenever you are in the market to purchase (not just a coil nailer but any tool) should be good quality, this would be the first thing to check off you list! A well known brand is a good place to start.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 etinet.biz. All Rights Reserved.