Published at Tuesday, September 11th 2018. by Lou Russo in Nailer.
Siding nailers - Sliding nailers are also highly specialized tools and they are built for the purpose of nailing down siding. They come with a large magazine meant to carry nails made especially for siding. These too tend to be coil type.
I have fallen victim in the past buying cheap imports thinking I had found a bargain but in fact it was just the opposite, those imports did not even finish the first project I was working on at the time of purchase.
When you're using the finish nailer, have the tip positioned on to the trim board where you want to have the nail driven. Then, carefully adjust its position so that you'll drive the nail in the right direction. Usually, when the finish nailer's cylinder and its tip line up perpendicularly to the board's face, it gets your nail driven squarely in the board. In some cases however, you need to adjust the nail's angle so you can capture enough wood behind the molding or trim you're using.
Roofing and siding nailers are of similar size, roofing coil nailer will often have adjustable shingle guides to help keep your work consistent. If you are looking at a gun for dry wall, fibre cement or any project that marks easily you need to be sure the nose of the gun is not sharp and aggressive. On the other hand an aggressive nose is very handy on most other projects making it easy for the tip of the coil nailer to grip to the surface you are nailing when angle nailing.
Porter-Cable is another superior performer in the world of pneumatics; built with durable innovation, and brilliant speed and power, Porter-Cable's PIN100 1" pin nailer is uncommonly awesome in a variety of tough applications. Shooting 23 gauge micro pin nails from 1/2" to 1" long, the tool automatically adjusts to different fastener lengths to ensure that your pins are not only permanently tight, but always in the right place as well. Additionally, the tool's bottom load magazine holds 170 micro pin nails, and because it also has a nail reload indicator, empty magazines will be the least of your worries. The nailer is extremely lightweight weighing only 2 lbs; this compact design provides optimized access into tight spaces, corners, and awkward spots - ultimately keeping you more comfortable and your materials more protected from the potential dents or dings of a bulkier tool. The pinner's rear exhaust port channels debris, tool oil, and other contaminates away from your workpieces, and pricing from about $100 - $110, the tool is both professionally awesome and quite affordable.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 etinet.biz. All Rights Reserved.