Published at Sunday, September 09th 2018. by Corine Patrick in Nailer.
I have fallen victim in the past buying cheap imports thinking I had found a bargain but in fact it was just the opposite, those imports did not even finish the first project I was working on at the time of purchase.
In saying that the first thing to look for whenever you are in the market to purchase (not just a coil nailer but any tool) should be good quality, this would be the first thing to check off you list! A well known brand is a good place to start.
When you work on a finish nailer, you need the head to be just below the board's surface so it can be filled easily with the nail filler. If your nails haven't been sunk completely, you can use a hammer and a nail set to drive them in completely (although, this is extra work which you shouldn't have to do if you do things right). The problem which you usually get is caused by either an insufficient amount of pressure from the compressor, or the depth on the adjustment dial which wasn't set correctly. If you're not sure with the settings you need to use, consult your operating manual and follow the instructions on how to correctly modify the depth adjustment.
Senco's FinsihPro10 (23 gauge) pin nailer is another example of Senco's line of brilliant pneumatic machines. At only 2.35 lbs the tool is ultra compact and lightweight to ensure strained, awkward, or continuous use is simpler and more comfortable for operators. Ideal for the most intricate finish, trim, and remodeling work, the FinishPro 10 fastens securely while still only making a virtually imperceptible hole in your materials. a hardened steel driver contributes to overall longevity, and with a smooth metal cap to protect your working materials, the pinner, with durabilty and delicate precision, yields results impeccable to the slightest detail. To ensure you are safe from a frustratingly empty magazine, the tool has a low load indicator, and is designed to load easily. The nailer shoots 1/2" - 1" fasteners, and with the help of a rear exhaust system,your work is protected from damaging oil and dust. Altogether, this pin nailer is built with sophistication for smooth, powerful, comfortable use in even hard woods and rough materials, and pricing at just about $130, the nailer is a smart, affordable addition to your tool repertoire.
The finish nailer is among the most useful tools for those who are doing woodworking. They help nail moldings as well as other small trim boards easily. You can drive thin finish nails through boards of hardwoods and softwoods, as well as manufactured products like MDF, while leaving behind a really small nail hole which you can fill easily with a wood filler. Another benefit of having to use a thin nail is that, you're less likely to split delicate trim boards compared to using larger types of nails or even wood screws.
Any content, trademark’s, or other material that might be found on the etinet.biz website that is not etinet.biz’s property remains the copyright of its respective owner/s. In no way does etinet.biz claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 etinet.biz. All Rights Reserved.